Digital Security Controls PC1575 Installationshandbuch PDF herunterladen (Seite 55)

wiring has been cut or otherwise does not form a complete loop. This will

only occur if the system has been programmed for Double End-of-Line

Resistor Zone operation.

• “Trbl” indicates the zone is presently in a trouble condition. This means that

the zone wiring has been cut or otherwise does not form a complete loop.

The condition will only occur for Supervisory Zones (such as 24-Hour Fire,

Delayed Fire, Auto-Verify Fire and LINKS Supervisory zones).

PC4020 and PC4010 v2.x:

• “O” indicates the zone is presently secure

• “S” indicates the zone is presently faulted (shorted). This will only occur if

the zone is using Double End of Line Resistor Zone Operation.

• “T” indicates the zone is presently in a tampered condition. This

means the zone wiring has been cut or otherwise does not form a

complete loop.

• “V” indicates the zone is not secure.

• “R” indicates the zone is presently in a Trouble condition. This

means that the zone wiring has been cut or otherwise does not

form a complete loop. The condition will only occur for Supervisory

Zones (such as 24-hour fire, Delayed fire, Auto-Verify fire, and

Links Supervisory Zones).

• “F” indicates that a wireless RF zone is not communicating with

the panel.

• “L” indicates that a wireless RF zone's batteries are low and need

to be replaced.

• “M” indicates that a wireless RF zone has been tampered with and

removed from it's backplate.

PC5015, PC5010, PC5008, PC1575/1580, PC1565-2P, PC1555/1565

and PC580/585:

• “OK” indicates the zone is presently secure.

• “Open” indicates the zone is not secure.

• “Tmpr” indicates the zone is presently in a tampered condition.

This means the zone wiring has been cut or otherwise does not

form a complete loop.

• “Fault” indicates the zone is presently faulted (shorted).

• “LoBat” indicates that a wireless RF zone's batteries are low and

need to be replaced (PC5015, PC5010, PC5008, PC1565-2P,

PC1555/1565 and PC580/585).

• “• •” indicates the zone does not exist or is not enrolled.

• Arm/Disarm

Uploads the armed status of each partition.

• “No” indicates the partition is disarmed

• “Yes” indicates the partition is armed.

• Alarm Memory

Uploads the Alarm Memory Status of each zone.

• “Yes” indicates the zone was in alarm during last armed period

• “No” indicates the zone was not in alarm

• Bypass Zones

Uploads the bypass status of each zone. This does not include Home-Away

zones that were bypassed automatically; only manually bypassed zones are

displayed.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 109 110

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Security Controls PC1575 Installationshandbuch Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Security Controls PC1575