Digital Security Controls PC1575 Installationshandbuch PDF herunterladen (Seite 32)

C If periodic downloading or the call back feature are enabled, a Downloading

Telephone Number must be programmed in Section [22].

NOTE: If periodic downloading is enabled (section [10], option [4]), a time must be

programmed in section [13]. The interval, in days, for periodic downloading may be

also programmed in section [13].

WLS900: Preparation for Downloading

A Make note of the Download Access Code in section [72] and the panel identifier code

in section [73] so that you can enter these values into the DLS-1 customer work file.

B In section [70], enable downloading by turning on option 1. If the panel is to use the

Double Call feature, turn off option [2]. If callback is to be enabled, turn on option

[3]. If the user is to initiate the call from the panel to the computer, turn on option [4].

If the panel is to initiate the call to the computer periodically, turn on option [5].

C If Callback was enabled, the phone number the panel must call to reach the

computer must be programmed in section [71].

D If the Double Call feature is not enabled, the panel will answer a call from the

computer after a specific number of rings. The number of rings the panel will answer

after can be programmed in section [74].

P-16 and P-1664: Preparation for Downloading

A Make note of the Downloading Access Code in Mode 23 Address [002] and the

Panel Identifier Code in Mode 20 Address [016]. These codes are to be entered into

the DLS-1 customer work file. Make sure that the panel Identifier Code is not the

same as the Identifier Codes in other Work Files.

B Ensure that Auto-Answer is enabled in Mode 22 Address [004] Light 5 if the

downloading computer is to call the control panel. Program the “number of rings

before answer” in Mode 23 Address [005].

C User-Initiated Downloading is enabled in Mode 22 Address [004] Light 6 if the

control panel is to be able to call the downloading computer. Program a Downloading

Computer Telephone Number in Mode 20 Address [017].

DC1664: Preparation for Downloading

A Refer to the DC1664 Installation Manual to ensure that your hardware configuration

is capable of downloading.

B Make note of the Downloading Access Code in Mode 20 Section [FF] and the Panel

Identifier Code in Mode 21 Section [EC] programmed in the panel. These values

must be entered into the DLS-1 customer work file. Make sure that the Panel

Identifier Code is not the same as the Identifier Codes in other work files.

C Ensure that downloading is enabled in Mode 21 Section [00] Option (38), and that

Auto-Answer is enabled in Mode 21 Section [00] Option (45).

D The number of rings after which the panel will answer can be programmed in Mode

21 Section [EA]. Section [EA] is also used to enable the double ring feature in case

an answering machine is used on the same phone line as the control panel.

Program “99” in Section [EA] to enable the double ring feature.

You can enable the Callback feature in Mode 21 Section [00] Option (40) if you

require this security feature. If you have enabled the User Call Up or the Callback

features, you must also program the telephone number of the downloading

computer in Mode 21 Section [EB].

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 109 110

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Security Controls PC1575 Installationshandbuch Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Security Controls PC1575