Digital Security Controls PC1575 Installationshandbuch Seite 10
- Seite / 10
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
8
PROGRAMMING THE LINKS2450
Section 3
See section 3.1 for programming instructions when connecting the LINKS2450 to
a PC5015, PC5010, PC1575/1580, PC1555/1565 or PC580/585 panel. See section
3.2 for programming instructions when connecting the LINKS2450 to a PC4010 or
PC4020 v3.0 panel.
3.1 Programming a LINKS2450 connected to a PC5015, PC5010,
PC1575/1580, PC1555/1565 or PC580/585 Panel.
Program the LINKS2450 through Installer’s Programming at a system keypad.
For instructions on using Installer’s Programming sections, please refer to
Section 4 “How to Program” in your control panel
Installation Manual
.
1. Go to Installer’s Programming by entering [*][8][Installer’s code].
2
.
For PC5015, PC5010, PC1555/1565 and PC580/585: Go to the LINKS2450
programming section by entering [803]. Program the following sections only
(see Section 4 for a description of each section). Record your programming
choices in the worksheets at the end of this manual.
[01][01]
[01][01]
[01] Module Configuration
Option 1:Option 1:
Option 1:Option 1:
Option 1: Communications Enabled / Disabled
Option 2:Option 2:
Option 2:Option 2:
Option 2: Serial Connection / Keybus Connection
[10][10]
[10][10]
[10] LINKS2450 Account Code
[20][20]
[20][20]
[20] Maintenance Alarms and Restoral Reporting Codes
[30][30]
[30][30]
[30] Call Direction Options
[83][83]
[83][83]
[83] Miscellaneous Alarm Reporting Codes (PC1555/1565 v2.0 panel only)
3. For PC1575/1580:
Go to the LINKS2450 programming section by entering
[86]. Program the following sections only (see Section 4 for a description of
each section). Record your programming choices in the worksheets at the
end of this manual.
[01][01]
[01][01]
[01] Module Configuration
Option 1:Option 1:
Option 1:Option 1:
Option 1: Communications Enabled / Disabled
Option 2:Option 2:
Option 2:Option 2:
Option 2: Serial Connection / Keybus Connection
[10][10]
[10][10]
[10] LINKS2450 Account Code
[20][20]
[20][20]
[20] Maintenance Alarms and Restoral Reporting Codes
[30][30]
[30][30]
[30] Call Direction Options
[81][81]
[81][81]
[81] Miscellaneous Alarm Reporting Codes (PC1575/1580 panel only)
[82][82]
[82][82]
[82] Miscellaneous Restoral Reporting Codes (PC1575/1580 panel only)
4. To exit Installer’s Programming, press [#].
9
3.2 Programming a LINKS2450 for use with a PC4010/PC4020
v3.0 or higher panel.
There are two stages in programming the LINKS2450 for a PC4010 or PC4020 panel:
1. Program the LINKS2450 programming sections from a PC2550RK keypad
connected directly to the LINKS2450.
2. Program the LINKS2450 toggle options on the PC4010/4020 control panel.
Program the LINKS2450 from a PC2550RK Keypad:
1. Make sure the LINKS2450 is connected to a PC2550RK keypad (refer to
diagram 3-1). Make sure that jumper J3 is shorted.
2. Program the following sections only. Other programming sections are not
relevant to PC4010/4020 panels. See section 4 for a detailed description of
these sections.
Enter the two-digit number for each section you want to program, then enter the
data required to complete the section programming. If you enter information into
a section and make a mistake, press [#] to exit the section. Select the section
again, and re-enter the information correctly.
Record your programming choices in the worksheets at the end of this manual.
[01] Module Configuration
Option 1
: Communications Enabled / Disabled. Press [1] to alternately
enable or disable the option.
Option 2
: Serial Connection (Enabled) / Keybus Connection (Disa-
bled). Press [2] to alternately enable or disable the option.
[10][10]
[10][10]
[10] LINKS2450 Account Code. Enter 2 two-digit hexadecimal numbers.
Refer to your
Installation Manual
for information on hexadecimal
programming.
[20][20]
[20][20]
[20] Maintenance Alarms and Restoral Reporting Codes. Enter two hexa-
decimal digits for each code.
3. When you have finished programming the above sections, disconnect the
power and the PC2550RK keypad.
4. Connect the LINKS2450 to the panel as in diagram 2-2.
Diagram 3-1
Connecting the LINKS2450 to a
PC2550RK Keypad
8
PROGRAMMING THE LINKS2450
Section 3
See section 3.1 for programming instructions when connecting the LINKS2450 to
a PC5015, PC5010, PC1575/1580, PC1555/1565 or PC580/585 panel. See section
3.2 for programming instructions when connecting the LINKS2450 to a PC4010 or
PC4020 v3.0 panel.
3.1 Programming a LINKS2450 connected to a PC5015, PC5010,
PC1575/1580, PC1555/1565 or PC580/585 Panel.
Program the LINKS2450 through Installer’s Programming at a system keypad.
For instructions on using Installer’s Programming sections, please refer to
Section 4 “How to Program” in your control panel
Installation Manual
.
1. Go to Installer’s Programming by entering [*][8][Installer’s code].
2
.
For PC5015, PC5010, PC1555/1565 and PC580/585: Go to the LINKS2450
programming section by entering [803]. Program the following sections only
(see Section 4 for a description of each section). Record your programming
choices in the worksheets at the end of this manual.
[01][01]
[01][01]
[01] Module Configuration
Option 1:Option 1:
Option 1:Option 1:
Option 1: Communications Enabled / Disabled
Option 2:Option 2:
Option 2:Option 2:
Option 2: Serial Connection / Keybus Connection
[10][10]
[10][10]
[10] LINKS2450 Account Code
[20][20]
[20][20]
[20] Maintenance Alarms and Restoral Reporting Codes
[30][30]
[30][30]
[30] Call Direction Options
[83][83]
[83][83]
[83] Miscellaneous Alarm Reporting Codes (PC1555/1565 v2.0 panel only)
3. For PC1575/1580:
Go to the LINKS2450 programming section by entering
[86]. Program the following sections only (see Section 4 for a description of
each section). Record your programming choices in the worksheets at the
end of this manual.
[01][01]
[01][01]
[01] Module Configuration
Option 1:Option 1:
Option 1:Option 1:
Option 1: Communications Enabled / Disabled
Option 2:Option 2:
Option 2:Option 2:
Option 2: Serial Connection / Keybus Connection
[10][10]
[10][10]
[10] LINKS2450 Account Code
[20][20]
[20][20]
[20] Maintenance Alarms and Restoral Reporting Codes
[30][30]
[30][30]
[30] Call Direction Options
[81][81]
[81][81]
[81] Miscellaneous Alarm Reporting Codes (PC1575/1580 panel only)
[82][82]
[82][82]
[82] Miscellaneous Restoral Reporting Codes (PC1575/1580 panel only)
4. To exit Installer’s Programming, press [#].
9
3.2 Programming a LINKS2450 for use with a PC4010/PC4020
v3.0 or higher panel.
There are two stages in programming the LINKS2450 for a PC4010 or PC4020 panel:
1. Program the LINKS2450 programming sections from a PC2550RK keypad
connected directly to the LINKS2450.
2. Program the LINKS2450 toggle options on the PC4010/4020 control panel.
Program the LINKS2450 from a PC2550RK Keypad:
1. Make sure the LINKS2450 is connected to a PC2550RK keypad (refer to
diagram 3-1). Make sure that jumper J3 is shorted.
2. Program the following sections only. Other programming sections are not
relevant to PC4010/4020 panels. See section 4 for a detailed description of
these sections.
Enter the two-digit number for each section you want to program, then enter the
data required to complete the section programming. If you enter information into
a section and make a mistake, press [#] to exit the section. Select the section
again, and re-enter the information correctly.
Record your programming choices in the worksheets at the end of this manual.
[01] Module Configuration
Option 1
: Communications Enabled / Disabled. Press [1] to alternately
enable or disable the option.
Option 2
: Serial Connection (Enabled) / Keybus Connection (Disa-
bled). Press [2] to alternately enable or disable the option.
[10][10]
[10][10]
[10] LINKS2450 Account Code. Enter 2 two-digit hexadecimal numbers.
Refer to your
Installation Manual
for information on hexadecimal
programming.
[20][20]
[20][20]
[20] Maintenance Alarms and Restoral Reporting Codes. Enter two hexa-
decimal digits for each code.
3. When you have finished programming the above sections, disconnect the
power and the PC2550RK keypad.
4. Connect the LINKS2450 to the panel as in diagram 2-2.
Diagram 3-1
Connecting the LINKS2450 to a
PC2550RK Keypad
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Security Controls PC1575
(43 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.074 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern